nphubert93
CB750 Member
will the motor from a 750C fit onto the frame of a 750K??
-
🎁 Enter the Septemeber Vintage CB750 gift card giveaway! It's easy... Click here, post something, and you're entered into the drawing!
750k compared to 750c
- Thread starter nphubert93
- Start date
losttravlyr
CB750 Addict
no,not as a plug n play. i believe that they are different width motors so would it would take some fab work,then you will probably have hassles lining up the wheel and sprockets too.
What year/years are you referring too?
nphubert93
CB750 Member
a 79 750k frame and an 82 750c motor. and if the motor wont fit on, will i be able to take the cylinder jug from the 750c motor and put it on the 750k motor??
losttravlyr
CB750 Addict
in my previous reply i assumed you were asking about swapping a750c dohc motor to a 750k sohc frame. my bad,,swapping a 82 motor to a 79 frame will most likely work since both are dohc motors.
Last edited:
nphubert93
CB750 Member
okay thanks! will be attempting the swap within the week, i'll let you know if it bolts right up or not
nphubert93
CB750 Member
engine bolted up just fine!
