• Enter the March CB750 Supply gift certificate giveaway! It's easy... Click here, post something, and you're entered into the drawing!

1978 CB750F Super Sport Project.

Mr_FlightNurse

CB750 New member
Messages
3
Reaction score
2
Points
3
Location
Birmingham, AL
Hey Everyone!

I am writing because I have just received my engine build from the wonderful Ken at Cycle Ex.

I’m very amateur, and I don’t know what some of this stuff is quite frankly. Please educate me or let me know what you think of the build!
2D01914E-B568-472D-8B58-BB31DB57EA9E.jpeg

The build is as follows - copied from Ken’s invoice

Build a 970cc Hot-rod motor using pump gas and parts listed.

SUPER GASKET KIT
STROKER PISTONS
CARILLO RODS
DRI FILM GREEN ROD BEARINGS
DRI FILM GREEN MAIN BEARINGS
STOCK WEIGHT DELUXE CRANKSHAFT.
EBC CLUTCH FRICTION PLATES
CHAIN WHEEL
PRIMARY CHAIN
CRYO CAM CHAIN
PRIMARY CHAIN TENSIONER. 8% SPRING

CYCLEX RACING CAM CHAIN TENSIONER
ADJ CAM SPROCKET & BOLTS
SUPER FINISHED. CLOSE RATIO RACE TRANSMISSION.
HIGH LIFT VALVE GUIDES
F2 VALVES
F2. F3 TOP RETAINERS AND SPRING COMBO
TITANIUM NUTS
34MM CARBS
INSULATORS & CLAMPS FOR RS34
DYNA S IGNITION
NEW FIELD COIL RE-WOUND
CX-11 CAMSHAFT
OIL FILTER ADAPTER KIT
MAGNETIC DRAIN PLUG
OIL PRESSURE GAUGE
ALLEN COVER SCREW KIT
SPARK PLUGS
DOWEL PIN KIT
AIR FILTER MIKUNIS
TRANNY BEARING KIT
31 ARP BOLTS

HIGH OUT-PUT STARTER
BLACK POWDER COATED ENGINE

Breather Uni-filter
Ignition cover, gasket and screws.
Tach plug.

MACHINING:
DESCRIPTION
# 3 PORTED
COMBUSTION BLENDING
F2 DRAIN HOLE MOD
BIG BORE RE-SLEEVE
BORE TOP ENGINE CASE
LINE LAP CASES
Feed “O” ring modification.

The engine is complete, but I am building the rest of the bike with my father-in-law. So we are in the process. I just wanted anyone’s opinion on the engine build. Ken at Cycle Ex does incredible work!

Thanks for your time!

Very Respectfully,
- I.T. Krüg
 

Attachments

  • 06E69047-5BD7-4058-B895-E4CF9248C962.jpeg
    06E69047-5BD7-4058-B895-E4CF9248C962.jpeg
    379.7 KB · Views: 88
  • BFBE3E28-0F6C-4069-AB00-528986A27C2D.jpeg
    BFBE3E28-0F6C-4069-AB00-528986A27C2D.jpeg
    335.4 KB · Views: 89
  • 0AE173AB-9582-4603-B9CA-6B439CF887B8.jpeg
    0AE173AB-9582-4603-B9CA-6B439CF887B8.jpeg
    284 KB · Views: 95
  • 4CC62ACA-0CA4-4A56-9EED-6E6C0646C6F4.jpeg
    4CC62ACA-0CA4-4A56-9EED-6E6C0646C6F4.jpeg
    434.2 KB · Views: 123
  • 592AFAE5-1009-49E9-B79D-7B07D7C9F5D6.jpeg
    592AFAE5-1009-49E9-B79D-7B07D7C9F5D6.jpeg
    396.4 KB · Views: 98
  • 5F6522B2-2AC3-418A-BB7A-CC839012C066.jpeg
    5F6522B2-2AC3-418A-BB7A-CC839012C066.jpeg
    210.7 KB · Views: 93
  • 7706AF8C-9963-4D2F-85F2-9ABD0DB11D75.jpeg
    7706AF8C-9963-4D2F-85F2-9ABD0DB11D75.jpeg
    427 KB · Views: 90
Awesome engine, Im jealous. Top of the line everything, its a high Hp motor. Ask whatever questions you have about what you are unsure of.
 
Mr. Dirtdigger!

I’m a lucky man. I attempted rebuilding these a few times in my teens. However, 19 year old me ran out of money quickly. A decade later, after one degree, part of the way through my master’s, and by the blessing of my beautiful wife, I’ve got a green light for damned near anything. (Yes she loves me.)

I figured I’d get the motor out of the way first. I didn’t trust myself to turn a wrench like some of you experienced builders. Bought the entire bike from Ken and he will be sending the rest of the bits on another pallet.

I’d love to see this on a dyno. What do you reckon it will push Hp-wise?

Like I said, I’m very amateur. Eyes and ears open. My cup is empty. Please fill it with knowledge and wisdom. 🙌🏼

P.S. I do have a video at Ken’s shop if you’d like to hear it running.
 
I would guess it will probably be in the 100hp range? It take a ton of work to make power with these motors but I think you will probably be close to that . Ken does good work and knows what he is doing, I know he would know the hp of the motor.
 
100hp would be incredible. We will have to see once we get it all together. I'll likely have many more questions in the next year for building. Father-in-law is a lot more "handy" than I am (only according to my wife LOL). I'm excited to get into the project! I appreciate you taking the time. So cool to hear from legends like you!

Very Respectfully,

I.T. Krüg
 
Back
Top