Search results

have 74 cb 750, is it possible to put smaller rear shocks on to lower the bike. Without causing any problem in handling. I had a 86 bow 50 that had smaller rear shocks, 2 inch and pushed front forks up about 1/2inch. Wondering if anyone has done that with750"s...

have a 75 cb 750 F and a 74 k wiring harness everything works except the points do not fire all the time. I had it running long enough to set the idle and now the points fire on first rotation and then not....new coils and wires and plug caps. continuity through wires check out...battery...

Will a stator from a cb 900 work in my cb 750.? Look ever simular.

Will a stator from a cb900 work in my cb 750..1980...looks like it would

i am rebuilding carbs on a 74 cb 750. have cleaned and gone through the carbs and cleaned, all the jets look good. Floot bowls have no holes and also look good. besides gasket and o rings on fuel t's...should i replace internal carb parts with new aftermarket carb kits....?

What year range can I use . Have a 74 k4 frame and have gotten a 77 cb 750 triple tree complete. Will that work...just need to get the stem bearings

80 cb 750 C , do I have to take sidestand off to get pipes to line up...have 4 into 4

Hae a 80 cb 750 c with all kinds of electrical issues. have work through some and am now at...turn key on with neutral and oil light not on...puck starter button o and they light up..doesnt start but ...i can push button and put in gear and neutral light will go out...have checked the rightsize...

have 1980 750 C...got it o the point of checking wiring, hooked up battery and neutral light and oil light came on with no key in ignition. have been through about every wire and tested. what i know is that power is running through the ground system.. power at starter solenoid and one side of...

Got a 80 cb 750 and finely got to a point to hook battery up and dur some investigation. As soon as the positive cable made contact..green neutral light came on..with no key..pushed starter buttom and red oil light came on..where to start. Did replaced the part under the key holder and that...