• Enter the March CB750 Supply gift certificate giveaway! It's easy... Click here, post something, and you're entered into the drawing!

Search results

  1. Wez_

    82 CB750 Brat Build from the UK

    Beer crates?? Can't believe how sturdy those things are! I like the creativity of the removal! Thanks for the video.
  2. Wez_

    New Bike Owner with charging problem

    Maybe he needs to warm the bike up and set the idle?
  3. Wez_

    '79 CB750F SS -- 4 into 2 exhaust fabrication

    Meant 1-4, 2-3 as you stated above. So the moisture will eat the headers even if I put 3 coats of VHT before wrapping? I stripped to bare metal, 3 coats of VHT, then wrapped.
  4. Wez_

    Help: High idle can't even warm up

    HEHE, welcome angrymonkee!! It's hard not to giggle. But that's sort of how the bike is supposed to operate. Open the choke, and it revs high. .....sorry....but AMC is correct....Let it warm up...even if it idles at 5k. What are you worried about? Nothing is knocking or banging. Besides...
  5. Wez_

    Exhaust collar install 1982 dohc cb750

    it's those split washers that are your problem. When they are in original condition they can be all mangled up and just make installation a nightmare. Take a wire wheel to them. Also you can soak them in CLR (Calcium, Lime Rust) solvent. Works great. Best option would be have them soda...
  6. Wez_

    New member introduction, new projects (1980/81 CB750k CB900c)

    Welcome to the forum!! Nice projects! Those 900 cams from what I heard are a drop in replacement in the 750 of the same year range. The 900 will likely be heavier. Does it have that 10 speed transmission? If so, then it's definitely a heavy cruiser. The 750 screams and has great power to...
  7. Wez_

    '79 CB750F SS -- 4 into 2 exhaust fabrication

    Your rendering looks doable. If you can get those Y pipes and collect 1-3 and 2-4, that would be cool. You will have to have your bike jetted as the stock air box is no longer usable. Also make sure your "battery box" needed to relocate the battery, reg/rect and solenoid are clear of the...
  8. Wez_

    Bad carb leak after disassembling

    I have a small set of hex keys that allow me to remove any bowl with the carbs still installed in the bike. Also stock air box. You need a pretty low seat or sit on a cylinder block. You'll need to a line of sight to get the hex key seated in the head of the bolts to loosen them, but it's...
  9. Wez_

    '79 CB750F Super Sport -- Carburator Rebuild Kit

    You are likely paying for the quality of the rubber in that kit. I do like how they disclose the information regarding the material quality and recommend reusing jets. Thanks for looking into that AMC! The upfront cost of that kit is pricey. 4into1 has any small parts you'll need. My...
  10. Wez_

    RPM increase while shifting

    Thanks again AMC! The front cable was tight as all heck. Much better now. Just wanted to add...My cables weren't lubricated neither. After adjusting the cable and lubricating, the throttle now snaps shut when I let off it. Much better
  11. Wez_

    New Bike Owner with charging problem

    Don't scare him with valve clearances just yet :D Remove the right hand side cover housing the alternator. 3x 8mm hex bolts. Clean the rotor with brake clean and dry. using a multimeter, check the resistance between the two copper ring faces. You'll have to google the spec, but it's...
  12. Wez_

    '79 CB750F Super Sport -- Carburator Rebuild Kit

    Follow this write up and you'll be a pro.... http://www.cb750c.com/publicdocs/SeanG/Honda_Carb_Manual_revG.pdf Do your best on ebay to score an affordable rebuild kit with as many small parts and gaskets. Don't be cheap and go for the $5 rebuild kit. You'll be upset. Get yourself a decent...
  13. Wez_

    Exhaust Valve Leak After Top End Rebuild

    I had the same issue. It was explained to me that the slack in the cam chains after 40 years tolerance stacks. It was recommended that I split the difference with an emphasis towards advance instead of retarded. Split the difference of the misalignment with the marks going more toward the...
  14. Wez_

    RPM increase while shifting

    Thanks! I adjust and see how what happens.
  15. Wez_

    RPM increase while shifting

    OK, so the front cable pulls the butterflies open, and the rear cable closes it correct? If that's correct, then I should be increasing the slack in the front cable.
  16. Wez_

    RPM increase while shifting

    Wrapped the headers and made a home made skid plate :D
  17. Wez_

    RPM increase while shifting

    Hello Everyone, So I removed my carbs for some cleaning while I awaited parts to arrive. Upon reinstallation, when I pull the clutch in to shift through the gears, I can hear the bike "surge" or what I describe as the rpms slightly increasing. Prior, when I pulled in the clutch to shift...
  18. Wez_

    DOHC working on pods, what to do after removing airbox?

    Can't believe we are approving pods on these bikes lol. At any rate, stock air box here. The stock rubber "T" that connects those two crankcase breather hoses was cracked in about 8 places. I applied epoxy to my original "T" fitting to fix all the cracks and hooked up those original hoses...
  19. Wez_

    1982 DOHC wiring help!!

    https://www.cyclegear.com/accessories/clymer-manual-honda-cb750-dohc-79-82?utm_source=bing&utm_medium=cse&utm_campaign=CGD-PLA-Clymer%20Publications-Products&utm_id=bing_313116645_1241348714926575_77584330807610_pla-4581183917659765_c&utm_term=4581183917659765&msclkid=b544f27d75451c0f0187ad43ba2f...
  20. Wez_

    1981 CB750C carb adjustments. Won’t idle lower than 1800 rpms

    What's wrong with 120-125 psi?? I thought those were decent numbers as long as all 4 cylinders reading roughly the same
  21. Wez_

    Front Fork Interchange

    Sorry amc, you lost me here. What is the TRAC and what hole spacing are you referring to? Wont the upper tubes just slide into the lowers as long as they are the same length and diameter? I want to reuse my old lower pieces and find replacement inner fork upper tubes. What does TRAC stand for?
  22. Wez_

    Front Fork Interchange

    Wow, that's a bummer. So it's possible to slide out the inners and reuse my outer tubes I take it. I watched a ghetto youtube video on replacing seals and found myself banging on my chrome tubes with a pair of pliers....omg what was wrong with me. Anyways, my chrome surfaces have pitting. and...
  23. Wez_

    Front Fork Interchange

    Would air assisted, 81 CB 900 C front forks be a direct drop in replacement for my 82 Nighthawk SC triple tree? I am pretty sure these are both 37mm forks. The axle mounts behind the tube, forgot what it's called. My inner tubes need replacing and I'm shopping on ebay.
  24. Wez_

    Still need help with tuning CB750C carbs

    The stock air box is a pain to install but it's worth the effort. The hard part is ensuring the boots seal 360 degrees around along the air box face. I should make that write up on installing and removing the air box. Use new rubber and after a few installs and removals for cleans/adjustments...
  25. Wez_

    newest old bike I ever had!

    That baby is in incredible shape!! Thanks for sharing
  26. Wez_

    Still need help with tuning CB750C carbs

    OK, I'll back off this season. She pulls so hard and strong. It's just so tempting to Rev it high because she goes up there so strong and smooth, the bike really seems to like it. No stumbling what so ever, just smooth rpm climbs. The 4into1 with a SuperTrapp muffler sounds wicked! But...
  27. Wez_

    1982 Nighthawk cb750 - First Bike

    Thanks for the help AMC, dirtdigger and cb750 family. Mostly just ride her now....
  28. Wez_

    Still need help with tuning CB750C carbs

    Thanks for returning to this website AMC49. Listen to this guy. I did my best to follow his advise and rebuilt my cb750. First tried the PODS. While it ran nicely, I soon noticed that I could not go over like 8500 RPM. Everything else was great. Ordered 4 replacement boots and a new...
Back
Top