have 74 cb 750, is it possible to put smaller rear shocks on to lower the bike. Without causing any problem in handling. I had a 86 bow 50 that had smaller rear shocks, 2 inch and pushed front forks up about 1/2inch. Wondering if anyone has done that with750"s...
there is play behind the points plate, i can stick the feeler gage of .014 and take the play out of it. the advance unit is also moving a that much.. not sure if i can tighten up that larger nut to take play out. not sure how hard it will be to get the nut to tighten..reversed thread and will...
have a 75 cb 750 F and a 74 k wiring harness everything works except the points do not fire all the time. I had it running long enough to set the idle and now the points fire on first rotation and then not....new coils and wires and plug caps. continuity through wires check out...battery...
i am rebuilding carbs on a 74 cb 750. have cleaned and gone through the carbs and cleaned, all the jets look good. Floot bowls have no holes and also look good. besides gasket and o rings on fuel t's...should i replace internal carb parts with new aftermarket carb kits....?