• Enter the January CB750 Supply gift certificate giveaway! It's easy... Click here, post something, and you're entered into the drawing.

Recent content by mnvkngs65

  1. M

    1975 CB750 primary chains and tensioner question

    1975 CB750 basket case rebuild in progress (no idea how man miles on the engine, came with 2) (pic). Cracked the cases (first time doing so) and right away noticed the primary chain on the clutch side appears to have less tension than the inner chain (pic) - sounds like this may be normal after...
  2. M

    cylinder base gasket - gasket sealant?

    Dirtdigger, Happy New Year and Thanks!
  3. M

    cylinder base gasket - gasket sealant?

    Finishing the upper motor rebuild on my 73 cb750 and am a little nervous about the final steps failing (i.e. gasket leaks). I have a KP gasket set and was wondering if I should use any type of gasket sealant on the cylinder base gasket? The online company I bought it from advertised it does not...
  4. M

    1973 Cb750 exhaust ideas?

    Thanks, I spoke with someone there yesterday that couldn't give me much information, especially when it comes to diameter size of the inlet on the muffler. Waiting to see if they email me.
  5. M

    1973 Cb750 exhaust ideas?

    Thanks for the info. I emailed cyclex for more information.
  6. M

    1973 Cb750 exhaust ideas?

    Anyone have suggestions for a new quiet muffler so I can get rid of this dangerous and ugly aftermarket piece? The exhaust from the head is 4 into 1 and is about 2.5 inch in diameter at the junction. Thanks.
  7. M

    73 CB750 front brake issues

    Thanks, have new brake lines ordered. Hopefully that does the trick.
  8. M

    73 CB750 front brake issues

    Quick question. Is there anything I can use on the threads of the brake line at the caliper to stop a very small leak or do I have to buy a new caliper?
  9. M

    73 CB750 front brake issues

    Tried the other piston and caliper tonight, didn't work. I'll try a new piston in the caliper to see if that works. If it doesn't, I'll stick with the one caliper system. The MC is off a GL1000. Thanks!
  10. M

    73 CB750 front brake issues

    Thanks for the info. Sorry, didn't mention the brake configuration was changed to 2 discs at some point prior to purchase and I assume were working at some point as well. Both ports of the MC are open and functional (brake fluid can be expressed from the smaller port when pressure is applied...
  11. M

    73 CB750 front brake issues

    Thanks for the info. Still lost. Everything appears functional. Compensation port is open with fluid able to be expressed easily. Pistons in the brake caliper are spotless and able to slide past the seal prior to adding brake fluid. When I opened the bleeder valve last night I was able to...
  12. M

    73 CB750 front brake issues

    I just wanna ride!!! Still with front brake issues... I rebuilt the master cylinder and it appears to function with check valve working. I also rebuilt the brakes including new piston seals. The brake lines were not replaced but were cleaned out with wire and compressed air passes easily...
Top