brettp's latest activity

That's a lot. They must have a shop minimum charge. Keep looking

Been working on stopping the valve cover from leaking. I want to keep the original look of the bike but make it more sleek. I modified...

They did come through. I was curious to see that adjusting screw. Try letting the needles bounce a bit. As long as the cylinders are...

If your clearances are good, then you can at least check that off the list of things to check for any other reason. If your vacuum...

Ah. I am talking valve lash/clearance. Putting feeler gauges between the cam and valve shims. If your valves are too tight they will...

My first bike was a black 1997 nighthawk. Loved it.

Ah, then your jets are wrong, then. You cannot jet for pods and expect that increased fuel to work with stock carbs and stock airbox...

Mine jumped around between 0 and 20. If the needles aren't moving much, I'd say the vacuum lines on the gauges are closed off or the...

Stock carbs?

The mag and aluminum polish is great. The chrome wasn't.

Results no better than Windex

Where ever you got the post number for your bike, look under another bike to see what matches. You only need the first two sets to...

I disliked mother's chrome polish.