Rare back rim on that. I have one like it. Harley outer laced to Honda hub. I had a hard time locating spokes for it. I finally found an old time mechanic at a small out of the way cycle garage that had a few rims out back to scavenge from.
Not quite sure yet on the plan. Just starting with the carbs/ fuel system and then working on the electrical. I need an exhaust and I think I'll go with the 4 -1 might have to rejet the carbs for that though. The wires are all there they just need to be re attached. No idea if the coil is good but these things will come. I'm thinking using black on most of the bike for now since some of the chrome has alittle bit of rust around the contact points. If you guys have any pointers I'd love to hear them.