flatpick13
CB750 Member
I'm reinstalling my cams, with the crank at 1.4 - T and my exhaust cam installed with the #1 cylinder lobes pointed towards the spark plugs, I can see the sprocket punch marks above the head, but they don't align perfectly. They're probably closer to parallel with the floor than parallel with the head, but if I make the sprocket punches align perfectly with the head the lobes for the #2 cylinder are propped against the valve shims and the cam shaft isn't seated...
Anyone have any suggestions? Do the sprocket punch marks need to be perfectly aligned with the head? I'll grab some pictures and post in a follow-up to illustrate my predicament...
Anyone have any suggestions? Do the sprocket punch marks need to be perfectly aligned with the head? I'll grab some pictures and post in a follow-up to illustrate my predicament...