NatetheNoob
CB750 New member
Alright, it’s best time I reach out as I can‘t find a conclusive answer on the Internet.
I have altered the subframe of my 81 K, and also removed the lateral support Directly under the seat to make room for new electronics placement. I’ll replace this to keep rigidity of the frame. Before removing this large section the tailhoop and one smaller lateral support were in place.
So here’s the question: My rear wheel is roughly a centimeter left of center. Sprockets are in line. Spacers are in their correct places. Is this how it is supposed to be? Could it have shifted upon removal of support? I’ll try and upload a photo.
Thanks!
I have altered the subframe of my 81 K, and also removed the lateral support Directly under the seat to make room for new electronics placement. I’ll replace this to keep rigidity of the frame. Before removing this large section the tailhoop and one smaller lateral support were in place.
So here’s the question: My rear wheel is roughly a centimeter left of center. Sprockets are in line. Spacers are in their correct places. Is this how it is supposed to be? Could it have shifted upon removal of support? I’ll try and upload a photo.
Thanks!