Never2Old
CB750 Member
Guys, I'm looking for vacuum fittings I can use to connect gauges to my bike to synchronize the carbs. I have a 1980 CB750C and I just rebuilt the carbs. I'd like to hook up some gauges but I don't know how to connect them to the ports in the head. The screw has a 5mm x .8 thread and I haven't been able to find any fittings that would fit. The only place I've seen them is with a $200 gauge set.
I'm waiting on some valve shims to get the clearances sorted out (.005) to get my compression to where it should be. Fingers crossed the compression will be good and I don't have to worry about burnt valves. Then I'll put it all back together and fire it up.
Thanks for your help, hoping to get the bike on the road soon.
DC
I'm waiting on some valve shims to get the clearances sorted out (.005) to get my compression to where it should be. Fingers crossed the compression will be good and I don't have to worry about burnt valves. Then I'll put it all back together and fire it up.
Thanks for your help, hoping to get the bike on the road soon.
DC