Funkmethod
CB750 Member
I have a 1980 cb750c. Im trying to finish my engine build but I'm stuck putting the A-L cam holders on because Im missing one of the dowel pins that insert into the shaft and holder. But i have one extra long one for some reason. The short ones are 8x20 that Is the majority of them and this extra long one is 8x26. I found the schematic for it and it shows the 8x26 hanging out over by the A holder but no clear indication of where it goes. Anyone have any insight or had this issue before? Here is the link to the picture. The short ones of which im missing is labeled #24 and the extra long one i ended up with is #23. https://imgur.com/a/nTYZbEX