Results 1 to 3 of 3
  1. #1
    CB750 New Member ShiteHawk's Avatar
    Join Date
    Apr 2019
    Location
    Montana
    Posts
    2

    Right hand starter/kill replacement

    I finally got my 83 cb750 sc back in my possession after having to leave it in my parents horse stable for 5 years or so. Picking up where I left off, I need to replace the right hand starter switch housing. The little pin that sticks out and holds it in place broke off so it currently just spins on the bar. I cant seem to find any replacements online that say they fit this model and I get lost pretty quick when talking electrical. Are there any known aftermarket solutions or am I going to want to find a used OE replacement on ebay? Much appreciate any advice. Also fyi I'm not concerned with keeping stock look or anything, just function.

  2. #2
    CB750 Addict Wez_'s Avatar
    Join Date
    Apr 2017
    Location
    Enfield, CT
    Posts
    317
    Just remove the grip and switch and add maybe a 1" wide, single layer thickness of Gorilla glue tape onto the handle bar. That stuff sticks amazingly. Then snug the switch down onto the slightly thicker spot of tape attached to your bar. You'll have to align everything up and make sure you don't use too wide of a piece as the throttle may start getting stuck. If that happens, just cut the tape patch narrower and tighten again. Been working great for me with the same problem.

  3. #3
    CB750 New Member ShiteHawk's Avatar
    Join Date
    Apr 2019
    Location
    Montana
    Posts
    2
    I'll have to try that. Are you talking about the gorilla glue black duct tape?

    Sent from my LM-G710VM using Tapatalk

Similar Threads

  1. Hand levers
    By Hillbilly Bike in forum Frame / Suspension
    Replies: 2
    Last Post: 05-12-2018, 09:30 AM
  2. Electric Starter Kickback? Starter Not Fully Engaging Problem
    By bmaher86 in forum The DOHC Garage (1979-1983)
    Replies: 3
    Last Post: 09-24-2016, 09:38 AM
  3. Bad starter or starter motor? Small Video Included
    By ClusterFix in forum The CB750 Garage
    Replies: 1
    Last Post: 04-05-2016, 08:48 PM
  4. How to eliminate kill switch and ignition!
    By 80cafe750 in forum The CB750 Garage
    Replies: 0
    Last Post: 10-30-2015, 07:32 PM
  5. kill switch
    By Clint in forum The CB750 Garage
    Replies: 1
    Last Post: 01-17-2013, 04:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •