-
Enter the April CB750 Supply gift certificate giveaway! It's easy... Click here, post something, and you're entered into the drawing!
Hi I'm a new member
- Thread starter Commdish
- Start date
amc49
CB750 Guru
NGK D8EA works well. The OEM heat range.
Run compression check to begin with, commonly the bikes have been run into the ground when nobody ever adjusted valves, even the shops were lackluster about it. That coupled with somewhat errant clearance specs brings them down to not hit on all 4 a LOT. Carbs almost impossible to clean right add to that.
Compression spec is 170 psi.
Run compression check to begin with, commonly the bikes have been run into the ground when nobody ever adjusted valves, even the shops were lackluster about it. That coupled with somewhat errant clearance specs brings them down to not hit on all 4 a LOT. Carbs almost impossible to clean right add to that.
Compression spec is 170 psi.
Last edited:
Dave
CB750 Junkie
Hi.
You can download a 79-83 Honda CB750 repair manual from the link below. It's a zip file containing each chapter in pdf format.
File: 79-83CB750.zip
Size: 56.3mb
Link: https://mega.nz/#!cZIBzKza
Key: !ensiLKPb1nqjivvtb2jrBmQ25Mg7DGUrBp-MuYdMbvA
You can download a 79-83 Honda CB750 repair manual from the link below. It's a zip file containing each chapter in pdf format.
File: 79-83CB750.zip
Size: 56.3mb
Link: https://mega.nz/#!cZIBzKza
Key: !ensiLKPb1nqjivvtb2jrBmQ25Mg7DGUrBp-MuYdMbvA
amc49
CB750 Guru
There's other places too as well if that zip doesn't work, I myself have issue with Mega from time to time, some wonky virtual ram space limit error of sorts.
