• Enter the March CB750 Supply gift certificate giveaway! It's easy... Click here, post something, and you're entered into the drawing!

ignition

  1. breakbeatz69

    Oil behind ignition cover??

    Title says it all. I’m just curious, with this new to me 81’ cb750c, is there supposed to be some oil behind the ignition system? Or is there a seal in there that I need to replace to keep the oil out? Any and all advice is welcome. Thanks in advance, you guys all rock!
  2. C

    Ignition problems

    I have a 1981 Honda CB750 I’m not getting fire and I don’t have a service manual to get through the steps can someone help me out
  3. S

    Ignition has power but no spark?

    I installed a moto gadget M.Unit in my ‘78 Honda CB750K, and have everything wired up but not getting a spark. The starter motor is activated and turning over, but still can’t see a spark. I verified the ignition coils are getting 12v power from the B/w wire, continuity through, and power out of...
  4. T

    Help: I'm about to throw my beloved bike off a cliff

    My bike went from running perfectly fine one day, to hardly at all the next. It appeared cylinders 1&4 weren't firing (conclusion based on feeling the headers) and the bike was really bogged down. Considering the only link between those cylinders is with the coil, I installed a PAMCO (ultimate)...
  5. T

    Help: I'm about to throw my beloved bike off a cliff

    My bike went from running perfectly fine one day, to hardly at all the next. It appeared cylinders 1&4 weren't firing (conclusion based on feeling the headers) and the bike was really bogged down. Considering the only link between those cylinders is with the coil, I installed a PAMCO (ultimate)...
  6. R

    Pulse Generator

    Should I see oil on the pulse generator side? Or should it be dry?
  7. S

    Iridium Plug Gapping

    I have a 79 cb750 Limited. I'm replacing both ignition coils (one is faulty), the cables, and upgrading to iridium spark plugs. From NGK D8EA to NGK DR8EIX My question is this: Should I gap these plugs, do I need to? I'm in a toss up. The clymer that came with my bike has specifications for...
  8. grepper

    Plugs for Pamco

    I know I could email Pete directly, but I know he's on here and sharing his suggestion would be beneficial to many. So my Pamco Ultimate Ignition system is in the mail. Wondering what is the suggested spark plug for this system? By the way, I'm budget minded and love how his suggested...
  9. R

    My 1976 CB750 has Gremlins....HELP!

    I purchased a 1976 CB750 with 12,000 mile in January of 2012. I am the third owner of the bike and believe that it was well cared for before me. I live in NYC and stored the bike in a popular and serious bike lovers only indoor garage in the city. The resident mechanic at the shop is well...
  10. T

    need help - question about coils

    i got a dynatek ignition,the coils i have are from a 73,there shot cause wire pulled out of one of them. so what i need to know is basicly are coils from 78-90's the same as far as using with ignition? all my wiring is going to be from scratch too
  11. Travis

    Need a key made

    Anyone know of a good place to get a key made for my CB750 project? I have the numbers from the ignition.
Back
Top