raywilson
CB750 Enthusiast
It's been a while since this thread was tapped into. I have a 76 CB750 SS that I've put a new/used harness in because the PO had modified a lot of the functions and clipped a bunch of wires. Tail light won't come on. The Brown tail light wire runs to the new ignition switch and there's 2 browns leaving the switch. They seem intact but I will reluctantly cut the factory plastic to make sure they are connected. The tail light will come on in park and the brake lights work. The speedo/tach lights come on with the turn signals, I think that will be a more logical fix. The tail light is baffling me. All the dash lights work/function but the neutral is always on. Turn signal lights aren't connected yet as I am waiting for my fleabay purchase to arrive. All the colors are connected correctly. I'm assuming the green wire is a common non-specific ground and it doesn't matter what green goes in there. There is a solid lime green wire that isn't shown as lime in the schematic, only one color solid medium green is shown. Thanks in advance for any advice.
Ray
Ray