• Enter the March CB750 Supply gift certificate giveaway! It's easy... Click here, post something, and you're entered into the drawing!

1974 and 77 Project

MC770

CB750 Member
Messages
7
Reaction score
0
Points
1
Location
Crouse, NC
CB2.jpgCB1.jpgCB3.jpg


Hello all; new member to the forum. Wanted to log my build on my two CB750's that I picked up this past weekend, been wanting to do a CB build for the last couple of years and came across a deal on these two bikes that I just could not pass up! Ended up getting both bikes and almost four of every major component that goes with each bike for a good price and best of all titles for both bikes...surprising how hard that is around these parts:laugh: Going to be going for more of a restoration with slight mods to my taste on the bikes can't wait to share the progress I'll be making on these bikes in the next couple of weeks as I'm moving and they have to sit in storage for a little while
 
Doubled your pleasure! For the cracked side panels, you can use ABS plumbing cement with fiberglass cloth to give more strength.
 
Doubled your pleasure! For the cracked side panels, you can use ABS plumbing cement with fiberglass cloth to give more strength.

As far as the side cover I'm looking at just ordering some good ones they seem to be readily available and not too expensive
 
a748f5734f7c9a81d47120637d307066.jpg
837ebc8a83ac989f8a4633964ed8f4cc.jpg
562bbda7156305280d0f1d609bd1f6b6.jpg
b570681f0aaa973d1dda9f6e3fa6207b.jpg
6c35794f824e93c641700985f8b97eb1.jpg


Haven’t had a ton of time to work on the bikes since I’ve been busy moving into my new house; I did get almost all the parts up onto their shelves though; have all these and an entire parts bike available.... Going to be one hell of a jigsaw puzzle
 

Attachments

  • a748f5734f7c9a81d47120637d307066.jpg
    a748f5734f7c9a81d47120637d307066.jpg
    232 KB · Views: 1
  • 837ebc8a83ac989f8a4633964ed8f4cc.jpg
    837ebc8a83ac989f8a4633964ed8f4cc.jpg
    252.1 KB · Views: 1
  • 562bbda7156305280d0f1d609bd1f6b6.jpg
    562bbda7156305280d0f1d609bd1f6b6.jpg
    283.8 KB · Views: 1
  • b570681f0aaa973d1dda9f6e3fa6207b.jpg
    b570681f0aaa973d1dda9f6e3fa6207b.jpg
    278.9 KB · Views: 1
Hope the rocker arms got mark for the correct position on the camshaft, risk ruining the cam and the rockers if put back in the wrong place as they wear to each other.
 
Hope the rocker arms got mark for the correct position on the camshaft, risk ruining the cam and the rockers if put back in the wrong place as they wear to each other.

Sure are! Camshaft they go to is right there by them as well. These ones here are spares however; the engine I’m rebuilding still has the cam and rockers all in the head once this cold snap breaks I’ll be working on the chassis and get that all ready to go before I mess with the engine
 
Back
Top