Search:

Type: Posts; User: dan1951

Page 1 of 14 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    153

    Thanks amc for the explaination.

    Thanks amc for the explaination.
  2. Replies
    3
    Views
    153

    My mistake I removed the breather hose and have...

    My mistake I removed the breather hose and have it hanging on the side of the bike there is a minimum amount of engine air discharging from it but it is nothing like removing a tappet cover.
  3. Replies
    3
    Views
    153

    1971 sohc breather hose

    Hi everyone long time since I was on here, Anyway I have a lot of air coming from the tappet cover when running at idle I thought this pressure was released out the breather hose nothing comes from...
  4. Replies
    2
    Views
    317

    I looked at Mine which is a 1971 titled as a 1972...

    I looked at Mine which is a 1971 titled as a 1972 and the two on it has a section of rubber hoses connected to those and tucked on top of the air cleaner box. Perhaps for breathers or vents.
  5. Replies
    3
    Views
    636

    I have had luck sometimes with a hand impact...

    I have had luck sometimes with a hand impact driver as long as there is something left of the screw head.
  6. Replies
    6
    Views
    733

    Are You sure valves are not to tight? Not to...

    Are You sure valves are not to tight? Not to familiar with DOHC,s but seen instances with other engines.
  7. Replies
    2
    Views
    415

    black with white gold trim I believe was...

    black with white gold trim I believe was available Came with four mufflers and pipes two on each side.
  8. Replies
    6
    Views
    1,393

    First off do not fill the engine with oil in the...

    First off do not fill the engine with oil in the valve caps. The engine is a dry sump meaning the oil is stored in the oil tank not the oil pan when started the oil is fed from tank to the engine...
  9. Replies
    4
    Views
    805

    They all make gear mesh noise in neutral but not...

    They all make gear mesh noise in neutral but not a grinding sound more than likely a bearing in the trans unit. Not no expert just My opinion.
  10. Replies
    2
    Views
    738

    I call Mine the MONEYPIT, Nice bike by the way.

    I call Mine the MONEYPIT, Nice bike by the way.
  11. Thanks CB750 supply for the chance.

    Thanks CB750 supply for the chance.
  12. Replies
    5
    Views
    1,424

    Almost looks like steam.

    Almost looks like steam.
  13. Charge the battery to full charge 12.6 volts or...

    Charge the battery to full charge 12.6 volts or better use 1or2 Amp. charger. With everything turned off completely remove and touch the neg. cable to the battery if You get a slight arc do this in a...
  14. Amc is right, LED,s use a restrictive circuit to...

    Amc is right, LED,s use a restrictive circuit to drop power output.
  15. More than likely rusted internals in the mufflers.

    More than likely rusted internals in the mufflers.
  16. Replies
    5
    Views
    1,173

    The sleeve Your referring to is a part of the...

    The sleeve Your referring to is a part of the throttle cable bellcrank, If You broke it the the carbs will not function. If it is broke it will turn more than one revolution, I usually cut the old...
  17. Like to get the K2 back in running condition...

    Like to get the K2 back in running condition after setting for two years, Health condition improved. Thanks.
  18. Replies
    6
    Views
    1,531

    I have broke many side cover tabs off in the...

    I have broke many side cover tabs off in the past. The best fix is glue parts back to together with ABS cement not PVC glue but ABS it actually melt bonds the parts together. As AMC said replace...
  19. Replies
    12
    Views
    1,158

    Welcome to the forum, I believe a 1975 is still a...

    Welcome to the forum, I believe a 1975 is still a cb750K model not a SS but could be wrong. Anyway good luck on Your search.
  20. That is up to You, I have seen maybe six or seven...

    That is up to You, I have seen maybe six or seven bent ones in My life and the trees were not damaged. I meant progressive brand springs in the frt. tubes. Old springs tend to sag You can check the...
  21. Since the shop that that resealed the forks did...

    Since the shop that that resealed the forks did not top the forks off with oil is not saying much for there work, If the tree was cracked chances are one or both fork tubes are bent they are pretty...
  22. Replies
    20
    Views
    3,376

    Sorry for the screwup, I see pads (used) but have...

    Sorry for the screwup, I see pads (used) but have two retaining screws holding it place.
  23. Replies
    20
    Views
    3,376

    Not to familiar with the F model but they are...

    Not to familiar with the F model but they are available on E-bay O.E.M. part number 14500-425-020 fairly expensive at $189.95
  24. Replies
    10
    Views
    2,187

    Sure if You want to remove it, The reason I...

    Sure if You want to remove it, The reason I mentioned a solenoid is to avoid an electrical arc.
  25. For Sale - It is indeed a good looking bike, It is a free...

    It is indeed a good looking bike, It is a free market place and if a person wants it they will buy it. I have always had good luck selling bikes in the spring, Seems like they sell quicker at the...
Results 1 to 25 of 338
Page 1 of 14 1 2 3 4