Search:

Type: Posts; User: zimzim

Search: Search took 0.00 seconds.

  1. Replies
    6
    Views
    165

    Got it from Honda - has like two halves to it.

    Got it from Honda - has like two halves to it.
  2. Replies
    6
    Views
    165

    I don't disagree you shouldn't use sealant here,...

    I don't disagree you shouldn't use sealant here, but I think my alternative is to swap the oil pan out, and this is quickly becoming a ride til it dies bike with how much shit that has been...
  3. Replies
    6
    Views
    165

    Oil leaks from drain plug

    I'm leaking oil from the drain plug - previous owner had two non oem washers and a bunch of liquid sealant there. I replaced with a Honda washer and no liquid sealant, thinking everything would be...
  4. Replies
    3
    Views
    97

    Does this nut look normal? It's also an odd size,...

    Does this nut look normal? It's also an odd size, threaded on the inside, and there doesn't appear to be any planes of contact between it and the oil filter housing.
  5. Replies
    3
    Views
    97

    Oil filter housing all messed up

    The housing for my oil filter appears to be all kinds of messed up. Where there should be a 17mm nut, there is something in between 1/2" and 12mm, and I can't see how it is supposed to spin. Has the...
  6. The thing is there is a problem getting the tool...

    The thing is there is a problem getting the tool in, but on the intake side only. I have no issue on the intake, but it seems like it's time to do what I can this time and then run the bike into the...
  7. Not a problem with the shims, there was not...

    Not a problem with the shims, there was not enough actual clearance to get the tool in. I've managed to get the tool in partways, depress the buckets a bit, stick a screwdriver in the gap, and remove...
  8. Can't remove valve shims on intake side, too tight to measure clearance

    Hey all, new to the forum, just picked up an 82 cb750c last spring and tuning it up for use this summer. I'm checking the valve clearances per the service manual, and exhaust is all nicely between...
Results 1 to 8 of 8